Posts Tagged ‘Air Conditioning’

What is a SEER Rating?

Thursday, May 14th, 2009

Air conditioning is a great home feature to have during the hot Summer months, sleeping through the night is made much easier and it seems every friend that you have shows up when the mercury hit 28 degrees or more.

Well how do you keep the cool air flowing well not spending a fortune? Well it all starts with SEER. The efficiency of a air conditioning system is measured by it’s SEER rating “Seasonal Energy Efficiency Ratio”. This rating is set by Air Conditioning, Heating, and Refrigeration Institute.The higher the SEER rating the more efficient the air conditioning system.

A SEER rating is the Btu rating cooling output during a typical cooling season divided by the total electric energy input in watt hours during the same period.

For example, consider a 5000 BTU/h air-conditioning unit, with a SEER of 10, operating for a total of 1000 hours during an annual cooling season (e.g., 8 hours per day for 125 days).

The annual total cooling output would be:

5000 BTU/h * 8 h/day * 125 days = 5,000,000 BTU

With a SEER of 10, the annual electrical energy usage would be about:

5,000,000 BTU / 10 BTU/W·h = 500,000 W·h

The average power usage may also be calculated more simply by:

Average power = (BTU/h) / (SEER, BTU/W·h) = 5000 / 10 = 500 W

If your electricity cost is 20¢/kW·h, then your operating cost is:

0.5 kW * 20¢/kW·h = 10¢/h

Hope this helps clear up SEER ratings for everyone interested. So now that you know you can stay cool for less money with some informed shopping before installing your air conditioning system.

A-1 Ductworks is a Furnace and Duct Cleaning Company that specializes in Indoor Air Quality for the Fort McMurray Alberta Area. Contact us at 780-598-5966 for free estimates on Indoor Air Quality products and services


Air Conditioning Spring Start Up

Friday, May 8th, 2009
Air Conditioning System

Air Conditioning System

Your air conditioning system is made up of two parts, first the condenser unit which sits outside the home on a concrete block outside the house and the evaporator coils which sits above your furnace in the plenum of the ductwork. When the air conditioning system is in action warm or hot air is drawn from the return air grills in the home into the furnace through the blower and the heat is absorbed into the refrigerant gases in the A/C system the gases expand and are pumped out in pressured lines to the condenser unit outside where a large fan extracts the heat and compresses the gases to nearly a liquid and very cold state, the manipulated refrigerant gases are then sent back to the evaporator coils above the furnace and cold air is pushed into the supply side of the furnace system. The warm air from the return side of the furnace system is again absorbed by the refrigerant gases and the process starts over again.


Before Starting your air conditioning system up for the season there are a few things that you should do for preventative maintenance. (more…)